Nationwide 800-678-7395
Tucson 520-622-7395
Phoenix 602-253-4155
Select Your Vehicle:
Start new search
-$129
Lester 323313ND260
Lester 323313ND260a
Lester 323313ND260b
Lester 323313ND260c
Lester 323313ND260 Lester 323313ND260(a) Lester 323313ND260(b) Lester 323313ND260(c)

2005 Chevrolet Cobalt 2.2L L4 134CID Alternator

260 AMP Custom High Output Alternator OEM Built in the USA

✓ In Stock
✓ Fast Shipping
✓ Free Tech Support
✓ Free 2Yrs Warranty
$528.00 $399.00

Elevate your electrical system with our Pure Power 260 Amp High Output Alternator, the premier upgrade for your GM Ecotec engine. Whether you require additional power for an extensive audio system or enhanced lighting, our alternator is equipped to meet all your upgrade demands and beyond. Our Pure Power alternator serves as a direct replacement, eliminating the need for wiring modifications that often result in the check charging light remaining illuminated on your instrument cluster, as is the case with other alternator manufacturers.

Key features:

CHARGE LIGHT ON DASH WILL NOT STAY ON!

PCM control integrates effortlessly with the factory's electrical management system.

Streamlined design for straightforward installation.

Advanced six-phase hairpin technology windings for enhanced performance.

High-quality bearings and components from OEM sources.

Tech Notes:
This alternator features a smaller underdriven pulley and necessitates the installation of a drive belt that is 1/2 inch to 1 inch shorter. The most suitable belt part number for slingshot applications is Dayco part number 5050335.

Standard, with Powder Coat Options

260 Amp
Powder CoatingPowder coating process delays shipping up to 4 business days
Black Flat Texture
Burnt Red Flat Texture
FDE-Flat Beige Texture
Gloss Bright Orange
Gloss Hot Yellow
Gloss Neon Green
Gloss Neon Yellow
Gloss Passion Pink
Gloss Passion Red
Gloss Playboy Blue
Gloss Savannah Blue
Gloss White
Satin Yama Blue
Super Chrome Plus

Sling Shot, BIG 3 Wire Kit, 1/0 AWG - Premium Grade SGT Wire
(Required for all High Output alternators)

Our Big 3 wire upgrade kit is a must upgrade when purchasing your new Pure Power Sling Shot high output alternator. It is important to understand that when upgrading from a stock alternator to a high output alternator your factory wiring harness becomes less efficient because it was not designed to handle 250 amps of current flow. By simply adding the Pure Power Big 3 wire kit in combination with your factory wire harness will allow your new high output alternator to produce its maximum amperage upon demands.

What's Included:
34 in. of 1/0 Guage SGT Negative Cable
32 in. of 1/0 Guage SGT Negative Cable
11 ft of 1/0 Guage SGT Positive Cable
6 Pcs. 5/16 Ring Terminal
Machine crimped ends with weather resistant adhesive heat shrink tubing
Cable Tie's
Instruction Sheet

Big 3 wiring Kit Instructions


Pure Power Series

02581432

The 260 Amp Pure Power alternator is the definition of gold standard in high output alternators and is the perfect upgrade to help give you the extra power your looking for. The Pure Power 260 Amp is our flagship model and will not disappoint you.

Features
  • Installation Note:
    This unit comes equipped with a smaller alternator pulley, and we recommend using a ½ inch shorter drive belt for proper belt tension. For information and help to identify your current belt size and locating the ½ inch shorter belt size needed, refer to our Technical Notes, Reducing Your Vehicle's Belt Size | TAE (tucsonalternator.com). Our smaller drive pulley is not recommended for sustained use above 5,500 RPM engine speeds.
  • The highest charging output, at idle, in the industry
  • Amazing heat dissipation
  • Durable 6phase Hairpin stator technology
  • 12 50 amp avalanche diodes for durability
  • OEM SKF high heat bearings
  • OEM brushes and brush holder for extreme long life
  • Every alternator is endurance tested on the most advanced dyno tester in the industry, DV Electronics/Alt-98, to ensure the correct performance specs and durability.
  • INSTALLATION NOTES:
  • Our New Pure Power alternator has a single red wire coming out of the pigtail attached to the regulator, this wire must be connected to a switched 12 volt ignition source, ON & OFF with your key switch. (Instructions come with the alternator)
  • We provide a R.V.C. bypass plug that will keep the check engine light OFF, in most cases.
  • You must run minimum 1 gauge size positive & negative cables from the alternator to the battery which will allow your new high output alternator to produce its maximum output with less resistance.
  • We offer a recommend slingshot big 3 wire kit when purchasing your new alternator online.


Specs

Mounting type
Direct OEM Replacement
Output Voltage
14.8
Stator configuration
6 Phase Hairpin
Amperage
260 AMPS
Pulley type
5 Groove Steel
Pulley Grooves
5
Rectifier
12 50 amp press fit diodes
Rectifier heatsink
Aluminum
Battery terminal size
8MM X 1.25 Copper
Warranty
24 Months Repair Warranty



Performance

CUSTOMER CARE
Industry leading 2 year warranty
World class customer service
BENEFITS OF JOINING THE PUREPOWER FAMILY:
ULTIMATE PERFORMANCE
Pure Power alternators aren’t just built to produce the maximum amperage, they’re built to give you the most amperage at idling speeds.
EASY DIRECT REPLACEMENT
Every Pure Power alternator is custom built to a direct fit.
SUPERIOR QUALITY
Using only the highest quality parts assures our customers their new Pure Power alternator is built to lasts a Lifetime
PURE POWER COMMITMENT
When you purchase your High Output Alternator, you join the Pure Power family. This family consists of car audio users, diesel owners, off roaders, along with our 5-star customer service team that is always here for you.

NEED HELP? CALL US 1-520-622-7395

M-F 8-5 / SAT. 9-2


FAST SHIPPING
Orders placed by 2pm EAST will be processed same day

TAE/CAE 2025

PayPal
Credit Card Processing
Tucson, AZ
M-F: 8:00 AM to 5:00 PM
Sat: 9:00 AM to 2:00 PM
Sun: Closed

Phoenix, AZ
M-F: 7:30 AM to 5:00 PM
Sat: 9:00 AM to 5:00 PM
Sun: Closed